Series LAC-TLAC

Hi Reliability Isolated Regulated
AC-DC Linear Modules

Typical Characteristics

Test Conditions: 25º C ambient
Input Voltage: 105-125 VAC
Input Frequency: 50-440 Hz
Line/Load Regulation: Consult chart
Output Voltage Tolerance: ±1%
Operating Temperature: -25º C to +70º C
Output Voltage Temperature Coefficient: 0.02%/ºC
Storage Temperature: -55º C. to +85º C
Typical Isolation: 100 megohms
Short Circuit Protection: Continuous

Features
  • Terminal Strips available - TLAC
  • Low output ripple = 1 to 2 mV RMS 
  • Encapsulated semiconductors, conservatively rated for maximum reliability 
  • Excellent voltage regulation 
  • Excellent load regulation 
  • Up to 10 watts output power at 70º C ambient 
  • Typical isolation: 100 megohms 
  • Single, dual, and triple outputs 
  • No heat sink required 
  • No output capacitor required 
  • This series of linear AC to DC Power Supplies are available in 46 different models. All single, dual, and triple output models offer excellent line and load regulation while maintaining the output voltage ripple at a minimum. Continuous short circuit protection and isolation are also standard on all models. The convenience of PC mounting, with mounting inserts, allow the use of this encapsulated unit in harsh environments, and the TLAC models offer a terminal strip for easy electrical connection.

    LAC SERIES - SINGLE OUTPUT

    Note: The torque for mounting screws must be 3 to 5 In-Lbs

    PACKAGE
    HEIGHT
    L1
    .875
    L2
    1.250
    L3
    1.560

    Larger Size Drawing

    Note: The torque for mounting screws must be 3 to 5 In-Lbs

    Bottom View
    Larger Size Drawing

    TYPICAL WEIGHT:
    L1/T1 - 340 Grams
    L2/T2 - 490 Grams
    L2/T2 - 605 Grams



     
     
     
     
     

    SERIES LAC-TLAC SINGLE OUTPUT

    **
    Pico
    Part
    No.
    Output
    Voltage
    VDC
    Max.
    Load
    Current
    mA
    Max.
    Output
    Power
    (watts)
    *
    Out Volt
    Toler-
    ance
    (±%)*
    V Ld.
    Reg
    Load
    Line
    Regu-
    lation
    Output
    Voltage
    Ripple
    @ Full
    Load
    mv rms
    Package
    Number
    Height
    Inch
    L
    Pkg
    Price
    **
    T
    Pkg
    Price
    LAC 5/500S
    5
    500
    2.5
    1.0
    0.2
    0.05
    1
    L1
    T1
    0.875
    136.50
    166.50
    LAC 5/1000S
    5
    1000
    5.0
    1.0
    0.2
    0.05
    1
    L2
    T2
    1.250
    175.50
    205.50
    LAC 5/2000S
    5
    2000
    10
    1.0
    0.2
    0.05
    1
    L3
    T3
    1.560
    238.50
    268.50
    LAC 12/120S
    12
    120
    1.44
    1.0
    0.1
    0.10
    1
    L1
    T1
    0.875
    138.00
    168.00
    LAC 12/200S
    12
    200
    2.4
    1.0
    0.1
    0.10
    1
    L2
    T2
    1.250
    148.50
    178.50
    LAC 12/500S
    12
    500
    6.0
    1.0
    0.1
    0.10
    1
    L3
    T3
    1.560
    157.50
    187.50
    LAC 15/120S
    15
    120
    1.8
    1.0
    0.1
    0.10
    1
    L1
    T1
    0.875
    112.50
    142.50
    LAC 15/200S
    15
    200
    3.0
    1.0
    0.1
    0.10
    1
    L2
    T2
    1.250
    135.00
    165.00
    LAC 15/500S
    15
    500
    7.5
    1.0
    0.1
    0.10
    1
    L3
    T3
    1.560
    169.50
    199.50
    LAC 24/100S
    24
    100
    2.4
    1.0
    0.1
    0.10
    1
    L1
    T1
    0.875
    133.50
    163.50
    LAC 24/300S
    24
    300
    7.2
    1.0
    0.1
    0.10
    1
    L3
    T3
    1.560
    163.50
    193.50
    *Measurements taken at 115VAC-60Hz
    ** For terminal strip model, add "T" to the front of part number

     

    SERIES LAC-TLAC DUAL OUTPUT

    **
    Pico
    Part
    No.
    Output
    Voltage
    VDC
    per
    output
    Max.
    Load
    Current
    mA
    per
    output
    Max.
    Output
    Power
    (watts)
    per
    output
    Out Volt
    Toler-
    ance
    (±%)*
    V Ld.
    Reg
    Load
    Line
    Regu-
    lation
    Output
    Voltage
    Ripple
    @ Full
    Load
    mv rms
    Package
    Number
    Height
    Inch
    L
    Pkg
    Price
    **
    T
    Pkg
    Price
    LAC 5/200D
    ±5
    200
    1.0
    1%
    0.1%
    0.05%
    1
    L2
    T2
    1.250
    180.00
    210.00
    LAC 5/300D
    ±5
    300
    1.5
    1%
    0.1%
    0.05%
    1
    L3
    T3
    1.560
    187.50
    217.50
    LAC 12/100D
    ±12
    100
    1.2
    1%
    0.1%
    0.02%
    1
    L1
    T1
    0.875
    153.00
    183.00
    LAC 12/300D
    ±12
    300
    3.6
    1%
    0.1%
    0.02%
    1
    L3
    T3
    1.560
    187.50
    217.50
    LAC 15/100D
    ±15
    100
    1.5
    1%
    0.1%
    0.02%
    1
    L1
    T1
    0.875
    187.50
    217.50
    LAC 15/300D
    ±15
    300
    4.5
    1%
    0.1%
    0.02%
    1
    L3
    T3
    1.560
    223.50
    253.50
    LAC 24/100D
    ±24
    100
    2.4
    1%
    0.2%
    0.01%
    1
    L2
    T2
    1.250
    202.50
    232.50
    LAC 24/200D
    ±24
    200
    4.8
    1%
    0.2%
    0.01%
    1
    L3
    T3
    1.560
    235.50
    265.50
    *Measurements taken at 115VAC-60Hz
    ** For terminal strip model, add "T" to the front of part number

    LAC SERIES - DUAL OUTPUT

    NOTE: The torque for mounting screws must be 3 to 5 In-Lbs

    PACKAGE
    HEIGHT
    L1
    .875
    L2
    1.250
    L3
    1.560

    Larger Size Drawing

    Bottom View
    Larger Size Drawing

    TYPICAL WEIGHT
    L1/T1 - 340 Grams
    L2/T2 - 490 Grams
    L3/T3 - 605 Grams 

    SERIES LAC-TLAC TRIPLE OUTPUT

    **
    Pico
    Part
    No.
    Main Output Voltage Auxiliary Output Voltage Package
    Number
    Ht.
    Inch
    L
    Pkg
    Price
    T**
    Pkg
    Price
    Out
    Volt.
    DC
    Out
    Max.
    Load
    Current
    mA
    Max.
    Output
    Power
    (watts)
    Output
    V Ld.
    Reg
    Load
    %
    Output
    Voltage
    Ripple
    @ Full
    Load
    mv rms
    Output
    Voltage
    DC
    per
    Output
    Max.
    Load
    Current
    mA
    per
    Output
    Max.
    Output
    Power
    (watts)
    per
    Output
    Volt
    Load
    Reg
    Load
    %
    Output
    Voltage
    Ripple
    @ Full
    Load
    mv rms
    LAC512A
    5
    250
    1.25
    0.2
    1.0
    ±12
    120
    1.44
    0.1
    1.0
    L3
    T3
    1.56
    253.50
    283.50
    LAC 512B
    5
    500
    2.5
    0.2
    1.0
    ±12
    120
    1.44
    0.1
    1.0
    L3
    T3
    1.56
    265.50
    295.50
    LAC 515A
    5
    250
    1.25
    0.2
    1.0
    ±15
    100
    1.50
    0.1
    1.0
    L3
    T3
    1.56
    256.50
    286.50
    LAC 515B
    5
    500
    2.5
    0.2
    1.0
    ±15
    100
    1.50
    0.1
    1.0
    L3
    T3
    1.56
    276.00
    306.00
    . Common Characteristics
    Main Output Voltage Tolerance ± 0.5% *
    Main Line Regulation ± 0.2% 
    Common Characteristics
    Auxiliary Output Voltage Tolerance ± 0.5% *
    Auxiliary Line Regulation ± 0.2% 
    *Measurements taken at 115VAC-60Hz
    ** For terminal strip model, add "T" to the front of part number
    PIN NO.

    TRIPLE

    1
    -Output (Aux.)
    2
    -Ouput (Main)
    3
    CM (Aux.)
    4
    +Output (Main)
    5
    +Output (Aux.)
    6
    AC
    7
    AC

    NOTE: The torque for mounting screws must be 3 to 5 IN-Lbs

    Bottom View
    Larger Size Drawing

    NOTE: The torque for mounting screws must be 3 to 5 IN-Lbs

    Bottom View
    Larger Size Drawing

    TYPICAL WEIGHT -- 605 Grams







    For immediate engineering assistance or to place an order:
    Call Toll Free: 800-431-1064

    PICO Electronics, Inc.

    143 Sparks Ave. Pelham, NY 10803-1837
    Tel: 914-738-1400
    Fax: 914-738-8225