PDF version

Series JR
DC to DC Converters
Single and Dual Output

Wide Input Range up to 3.33:1
Isolated, Regulated up to 15 Watt DC to DC Converters
Full Regulated All Units Shielded

 

This series of high efficiency, wide input range, encapsulated regulators come in 51 different models. These units feature a 500 VOLT DC input to output isolation in both single and dual output models. The JR Series will operate over a temperature range of -25º C TO +70º C with no heat sink or electrical derating. These units are excellent for applications where input voltage varies dramatically, yet a high efficiency and output voltage regulation must be maintained.

 

FEATURES
  • Single and dual isolated outputs
  • Voltage regulation over input range of
Unit
Low
High
JRA
18V
36V
JRB
36V
60V
JRC
18V
60V
  • Encapsulated semiconductors, conservatively rated for maximum reliability.
  • Load regulation (see table for typical variation at different loads)
  • Line regulation = Typical values

    18-36V DC = ±1.0%

    36-60V DC = ±1.0%

    18-60V DC = ±2.0%

  • High efficiency - up to 84%
  • Will operate over a temperature range of -25º C to
    +70º C with no heat sink or electrical derating
  • 6 sided shielding
  • Isolation - 100 megohms at 500 volts DC
  • External output trimming pin standard +5%
  • Each unit is supplied with an external control pin. This "C" pin, when connected to the negative (-) input, will disable the unit, allowing for remote shutdown.
TYPICAL CHARACTERISTICS:

Test conditions: 25º C ambient
Operating temperature: -25º C to +70º C ambient
Output voltage tolerance: ± 2% at typical input voltage
Output voltage temperature coefficient: 0.02% / º C
Storage temperature: -55º C to 125º C
Short circuit protection: Temporary
Operating frequency: 40Khtz, typical

OPTIONS AVAILABLE

  • Per Mil. Std. 883
  • Expanded operating temp. -55º C to +85º C Ambient
  • Stabilization Bake (125º C ambient)
  • Temperature Cycle -55º C to +125º C
  • High Temp, full power burn in (100% power, 125º C case temp)





 

 

SERIES JR - SINGLE OUTPUT

Pico
Part
Number
Input
Voltage
Range
Output
Voltage
DC
Max.
Load
Current
mA
Max.
Output
Power
(watts)
EFF.@
Full
Load
Typical
(%)*
Input
Current
Full
Load
Typical
(mA)*
Out Volt
Ripple @
Full LD.
1-1MHz BW
mv p-p
Out Volt
Tolerance
(± %)*
**

VLD. Reg.
25%-100%
Load
(± %)*

Line
Regu-
lation
(± %)
Price
(US $)
JRA3.3S
JRA5S
JRA5.2S
JRA9S
JRA12S
JRA15S
JRA24S
JRA28S
JRA48S
JRA100S
18-36
18-36
18-36
18-36
18-36
18-36
18-36
18-36
18-36
18-36
3.3
5
5.2
9
12
15
24
28
48
100
4545
3000
2885
1667
1250
1000
625
536
313
150
15
15
15
15
15
15
15
15
15
15
78
78
78
78
78
78
83
84
84
84
712
710
710
710
710
710
670
660
660
660
100
50
50
40
40
40
40
40
50
75
1.00
0.75
0.75
0.50
0.50
0.50
0.50
0.75
0.75
0.50
3.00
2.00
2.00
1.50
1.00
1.00
1.00
0.50
0.50
0.75
3.00
1.50
1.50
0.50
0.50
0.50
0.25
0.25
0.25
0.25

188.75
188.75
188.75
188.75
188.75
188.75
188.75
188.75
188.75
253.58

JRB3.3S
JRB5S
JRB5.2S
JRB9S
JRB12S
JRB15S
JRB24S
JRB28S
JRB48S
JRB100S
36-60
36-60
36-60
36-60
36-60
36-60
36-60
36-60
36-60
36-60
3.3
5
5.2
9
12
15
24
28
48
100
4545
3000
2885
1667
1250
1000
625
536
313
150
15
15
15
15
15
15
15
15
15
15
78
78
78
78
80
81
83
84
84
84
401
400
400
400
390
385
375
370
370
370
100
50
50
40
40
40
40
40
50
75
1.00
0.75
0.75
0.50
0.50
0.50
0.50
0.50
0.50
0.50
3.00
2.00
2.00
1.50
1.00
1.00
1.00
0.50
0.50
0.50
3.00
0.75
0.75
0.50
0.50
0.50
0.25
0.25
0.25
0.25
220.21
220.21
220.21
220.21
220.21
220.21
220.21
220.21
220.21
295.85
JRC3.3S
JRC5S
JRC5.2S
JRC9S
JRC12S
JRC15S
JRC24S
JRC28S
JRC48S
JRC100S
18-60
18-60
18-60
18-60
18-60
18-60
18-60
18-60
18-60
18-60
3.3
5
5.2
9
12
15
24
28
48
100
4545
3000
2885
1667
1250
1000
625
536
313
150
15
15
15
15
15
15
15
15
15
15
78
78
78
78
80
81
83
84
84
84
493
495
495
495
480
475
465
460
460
460
100
50
50
40
40
40
40
40
50
75
1.00
0.75
0.75
0.50
0.50
0.50
0.50
0.50
0.50
0.50
3.00
2.00
2.00
1.50
1.00
1.00
1.00
0.50
0.50
0.50
3.00
1.50
1.50
0.75
0.75
0.75
0.50
0.50
0.50
0.50
235.94
235.94
235.94
235.94
235.94
235.94
235.94
235.94
235.94
316.98
* Measurements taken with input voltage set at mid value
** 10% minimum load require

 

SERIES JR - DUAL OUTPUT

Pico
Part
Number
Input
Voltage
Range
Output
Voltage
DC
Per
Output
Max.
Load
Current
mA
Per
Output
Max.
Output
Power
(watts)
Per
Output
EFF.@
Full
Load
Typical
(%)*
Input
Current
Full
Load
Typical
(mA)*
Out Volt
Ripple @
Full LD.
1-1MHz BW
mv p-p
Out Volt
Tolerance
(± %)*
**

VLD. Reg.
25%-100%
Load
(± %)*

Line
Regu-
lation
(± %)
Price
(US $)
JRA5D
JRA9D
JRA12D
JRA15D
JRA24D
JRA28D
JRA48D
18-36
18-36
18-36
18-36
18-36
18-36
18-36
5
9
12
15
24
28
48
1500
833
625
500
313
268
156
7.5
7.5
7.5
7.5
7.5
7.5
7.5
78
78
78
78
83
84
84
710
710
710
710
670
660
660
50
40
40
40
40
40
50
0.75
0.50
0.50
0.50
0.50
0.75
0.75
2.00
1.50
1.00
1.00
1.00
0.75
0.75
1.50
0.50
0.50
0.50
0.25
0.25
0.25
221.52
221.52
221.52
221.52
221.52
221.52
238.09
JRB5D
JRB9D
JRB12D
JRB15D
JRB24D
JRB28D
JRB48D
36-60
36-60
36-60
36-60
36-60
36-60
36-60
5
9
12
15
24
28
48
1500
833
625
500
313
268
156
7.5
7.5
7.5
7.5
7.5
7.5
7.5
78
78
80
81
83
84
84
400
400
390
385
375
370
370
50
40
40
40
40
40
50
0.75
0.50
0.50
0.50
0.50
0.50
0.50
2.00
1.50
1.00
1.00
1.00
0.50
0.50
0.75
0.50
0.50
0.50
0.25
0.25
0.25
252.98
252.98
252.98
252.98
252.98
252.98
271.90
JRC5D
JRC9D
JRC12D
JRC15D
JRC24D
JRC28D
JRC48D
18-60
18-60
18-60
18-60
18-60
18-60
18-60
5
9
12
15
24
28
48
1500
833
625
500
313
268
156
7.5
7.5
7.5
7.5
7.5
7.5
7.5
78
78
80
81
83
84
84
495
495
480
475
465
460
460
50
40
40
40
40
40
50
0.75
0.50
0.50
0.50
0.50
0.50
0.50
2.00
1.50
1.00
1.00
1.00
0.50
0.50
1.50
0.75
0.75
0.75
0.50
0.50
0.50
268.71
268.71
268.71
268.71
268.71
268.71
288.80
* Measurements taken with input voltage set at mid value
** 10% minimum load require

 

Series JR Single Output

 

Series JR Single Output
C: is control pin
NOTE: all radii typ. 7/64"
 

bottom view

Larger Size Drawing

Use 50 K Ohm trim rated 1/4 Watt between trim pin and negative input.  Trim down to raise output voltage to a maximum of 5%.  Do not go beyond the 5%.  Reducing the resistance value further could damage the module.

Each unit is supplied with an external control pin. This "C" pin, when connected to the negative (-) input, will disable the unit, allowing for remote shutdown.

Larger Size Schematic

Typical Weight: 115 Grams

 

   

 

Series JR Dual Output

 

Series JR Dual Output
C: is control pin
NOTE: all radii typ. 7/64"
 

bottom view

Larger Size Schematic

Use 50 K Ohm trim pot rated 1/4 Watt between trim pin and negative voltage.  Trim down to raise output voltage to a maximum of 5%.  Do not go beyond 5%.  Reducing the resistance value further could damage the module.

Each unit is supplied with an external control pin. This "C" pin, when connected to the negative (-) input, will disable the unit, allowing for remote shutdown.

Larger Size Schematic

Typical Weight: 115 Grams

 

   

 


For immediate engineering assistance or to place an order:
Call Toll Free: 800-431-1064

PICO Electronics, Inc.

143 Sparks Ave. Pelham, NY 10803-1810
Tel: 914-738-1400 or Fax: 914-738-8225

 

Go back to DC-DC Converters menu