PDF version

 


SERIES HVP
HI VOLTAGE PROGRAMMABLE
PLUG-IN MODULES

0 - 100Vdc to 0 - 6000Vdc

5 Watt Positive and Negative Output Voltages


The HVP Series miniature precision 5 Watt High Voltage Converters are encased in a six side shielded case measuring only 2.55"x1.30"x0.50"(h). The low profile enables them as PCB mountable components in customer applications.

 

FEATURES:
  • Accessible Calibration Trimmer
  • 5 Watt Output
  • Precision Regulated
  • Low Ripple
  • Low Temperature Coefficient
  • 0 to 100% Output Programmable
  • Wide Input Range: 11 to 16 Vdc
  • Voltage Monitor and Reference Outputs
  • Input Over Voltage Protection
  • Output Arc, Over Current and Short Circuit Protection
  • Remote Shutdown
  • Operating Temperature Range: -25ºC to +70ºC
  • Miniature 6 side shielded low profile case (0.500")
  • PCB mountable

PHYSICAL CHARACTERISTICS:

  • Size: 2.55"(w) x 1.3" (d) x 0.5"(h)
  • Weight: 50 grams
  • Case: 6 side Metal Shield
  • Pins: 0.04" diameter, 0.40" length
 TYPICAL CHARACTERISTICS:
  • Input Voltage: 11 to 16Vdc.
  • Input Current: 150mA max. no load -- 650mA max. full load
  • Input voltage Shutdown: 18V, latching
  • Programming Voltage: 0 to 5Vdc -- shdn @ Vprog < 0.25V
  • Internal Programming Voltage Limit: 5.5 Vdc typical
  • Voltage Monitor: 0 to 5V for 0 to 100%V out
  • Reference Voltage: 5Vdc +/- 2%, 1mA max.
  • Linearity: <1% (10% to 100% Vout)
  • Output Current Limit: Iout, Max +30% typ.
  • Output Power: 5W max.
  • Efficiency: 70% typical
  • Internal Overtemperature Shutdown: 95ºC, latching
  • Line Regulation: <0.005% Vout
  • Load Regulation: <0.01% Vout (for 0 to 100% Load change)
  • Output Ripple: <0.007% Vout, peak - peak
  • Converter Frequency: 55 to 110kHz
  • Calibration Adjustment Range: >1%
  • Stability: <0.005%/hr
  • Temperature Coefficient: <50ppm/ºC
  • Operating Temperature Range: -25ºC to +70ºC
  • Storage Temperature Range: -55ºC to +125ºC

 

 

SERIES HVP
PICO
PART
NUMBER
OUTPUT
REGULATION
RIPPLE***
FULL LOAD
PEAK - PEAK
(%)typical
PRICE
(US $)
VOLTAGE
(V)
CURRENT
(mA)
LINE
(%)
LOAD
(%)
HVP0.1P
0 to +100
50
<0.005
<0.01
<0.015
285.08
HVP0.1N
0 to -100
50
<0.005
<0.01
<0.015
285.08
HVP0.25P
0 to +250
20
<0.005
<0.01
<0.007
285.08
HVP0.25N
0 to -250
20
<0.005
<0.01
<0.007
285.08
HVP0.5P
0 to +500
10
<0.005
<0.01
<0.007
342.33
HVP0.5N
0 to -500
10
<0.005
<0.01
<0.007
342.33
HVP1P
0 to +1kV
5
<0.005
<0.01
<0.007
342.33
HVP1N
0 to -1kV
5
<0.005
<0.01
<0.007
342.33
HVP2P
0 to +2kV
2.5
<0.005
<0.01
<0.007
400.72
HVP2N
0 to -2kV
2.5
<0.005
<0.01
<0.007
400.72
HVP3P
0 to +3kV
1.67
<0.005
<0.01
<0.007
400.72
HVP3N
0 to -3kV
1.67
<0.005
<0.01
<0.007
400.72
HVP4P
0 to +4kV
1.25
<0.005
<0.01
<0.007
400.72
HVP4N
0 to -4kV
1.25
<0.005
<0.01
<0.007
400.72
HVP5P
0 to +5k
1.00
<0.005
<0.01
<0.015
400.72
HVP5N
0 to -5k
1.00
<0.005
<0.01
<0.015
400.72
HVP6P
0 to +6k
0.84
<0.005
<0.01
<0.015
452.24
HVP6N
0 to -6k
0.84
<0.005
<0.01
<0.015
452.24

NOTES:
All specifications are given under the following conditions: +25ºC ambient, 12Vdc Input at Full Load
Measurements taken after 1 hour warm-up
Load regulation given for 0 to 100% load change
For negative output units (suffix N), Vmonitor returns a buffered signal of the internal programming voltage
For expanded temperature range or non-standard features, please consult factory
***FOR LOWER RIPPLE APPLICATIONS CONSULT FACTORY: 800-431-1064

 

SERIES HVP

 

Typical Weight: 70 grams

PIN DESCRIPTION:

Pin #1 (+IN): Input Voltage to the unit, 11Vdc to 16Vdc. Input Voltage of 18Vdc and higher will cause the unit to shut-down. To restore operation, Input Over Voltage condition should be removed and input power recycled.

Pin # 2 (MON): Returns a voltage proportional to the actual output voltage within 0 to 5Vdc range. Useful to identifying an overload condition by comparing with Vprog. For negative output units, Vmon returns a buffered signal of the internal programming voltage.

Pin # 3 (REF): 5V ref generated on board. Range: 4.90Vdc to 5.10Vdc (±2%). Current sourcing capability: <1mA.

Pin #4 (PROG): Programming Voltage 0 to 5Vdc controls the output within 0 to 100% Vout max. A programming voltage limiter is designed in to prevent internal programming voltage from exceeding 5.5Vdc. Input impedance at Pin # 4 to Gnd is higher than 100 Kohm (if Vprog doesn't exceed 5Vdc). When pulled below 0.25Vdc , the unit will shut-down, non-latching.

Pin #5 (COM IN): Return of the Input Voltage to the unit. Internally connected with COM OUT.

Pin # 6 (COM OUT): Return of HV Out. Connected with COM IN, represents the common point of input and output voltages

Pin #7 (Out): High Voltage Output

 

For immediate engineering assistance or to place an order:
Call Toll Free: 800-431-1064

PICO Electronics, Inc.

143 Sparks Ave. Pelham, NY 10803
Tel: 914-738-1400 or Fax: 914-738-8225

Go to High Voltage DC-DC Converter menu