PDF version

DC-DC Converters

Series HPC Single and Series HPC Dual

Isolated Regulated up to 200 Watts, Wide Input Range/100-180 VDC
Fully Regulated, Short Circuit Protected
Parallel Operation Available

 

Features:

 

  • Dual isolated outputs
  • Short circuit protection
  • Input voltage protection
  • Thermal, over temp. shutdown
  • Line regulation
  • Load regulation
  • No external components required
  • Hi density, hi efficiency design
  • Remote shutdown
  • Trim capabilities
  • Fixed frequency-100 Khtz

    Typical Characteristics:

    Frequency: 100 Khtz
    Base plate: Max. +85º C
    Operating temperature: See thermal chart, Min. 0º C ambient, Max. +85º C base plate temp.
    Test conditions: 25º C ambient
    Isolation Base Input: 2000 VDC
    Isolation Input Output: 2000 VDC
    Isolation Output to Base: 1000 VDC
    Storage temperature: -55º C to +105º C

    • 17 Standard Models
      100 VDC Output Models
      Hi Density 100 Watts
      Fixed Frequency

      For all variations, call factory.

    For Parallel Operation: Add suffix "P" (i.e. HPC5SP)

The new PICO HPC Series of high power DC-DC Converters, allow a wide input voltage of 100-180 VDC, while maintaining a regulated output. They are fully safeguarded for over voltage, over temperature and continuous short circuit protection.

The availability of Dual Isolated Outputs, small size, and the capability of parallel operations as standard features should reduce your design and component costs, while the fixed frequency operation helps parallel connections for higher power requirements.

This high density unit is assembled in the USA with PICO quality and component selection, allowing it to meet the most stringent commercial requirements.

 


Larger Version of Graph

 

 

Series HPC Single * 200 Watts * Input 100-180 VDC
Pico
Part
No.		 Input
Voltage
Range
(V DC)		 Output
Voltage
(V DC)		 Max.
Output
Power
*
(W)		 EFF.
Full Load
Typical
**
(%)		 Max.
Load
Regulation
(%) ***		 Max.
Line
Regulation
At Full Load
(%)		 Output
Voltage
Ripple
(Full Load)
1-1MHz BW
(MV P-P)		 Output
Voltage
Tolerance
**
(± %)		 Price
(US $)
10-50% 50-100% 100-150 150-180
HPC3.3S
100-180
3.3
75
71
1.50
1.50
1.25
1.25
50
1.5
239.19
HPC5S
100-180
5
100
76
1.25
1.25
1.00
1.00
50
1.5
239.19
HPC5.2S
100-180
5.2
100
76
1.25
1.25
1.00
1.00
50
1.5
239.19
HPC9S
100-180
9
150
80
1.25
1.25
1.00
1.00
50
1.0
239.19
HPC12S
100-180
12
200
83
1.00
1.00
0.75
0.75
50
1.0
239.19
HPC15S
100-180
15
200
84
1.00
1.00
0.75
0.75
50
1.0
239.19
HPC24S
100-180
24
200
86
0.75
0.75
0.50
0.50
50
0.75
239.19
HPC28S
100-180
28
200
86
0.75
0.75
0.50
0.50
50
0.75
239.19
HPC48S
100-180
48
200
86
0.50
0.50
0.50
0.50
50
0.50
239.19
HPC100S
100-180
100
150
85
0.50
0.50
0.50
0.50
50
0.50
306.65
10% Minimum load required at all times.
* Using proper thermal management, maximum temp. of +85º C (case)
** Reading taken at nominal 150 VDC input

 

 

Series HPC Dual * 150 Watts * Input 100-180 VDC
Pico
Part
No.		 Input
Voltage
Range
(V DC)		 Output
Voltage
(V DC)		 Max.
Output
Power
*
(W)		 EFF.
Full Load
Typical
**
(%)		 Max.
Load
Regulation
(%) ***		 Max.
Line
Regulation
At Full Load
(%)		 Output
Voltage
Ripple
(Full Load)
1-1MHz BW
(MV P-P)		 Output
Voltage
Tolerance
**
(± %)		 Price
(US $)
10-50% 50-100% 100-150 150-180
HPC5D
100-180
5
50/50
76
1.25
1.25
1.00
1.00
50
1.5
319.45
HPC9D
100-180
9
75/75
80
1.25
1.25
1.00
1.00
50
1.0
319.45
HPC12D
100-180
12
75/75
83
1.00
1.00
0.75
0.75
50
1.0
319.45
HPC15D
100-180
15
75/75
84
1.00
1.00
0.75
0.75
50
1.0
319.45
HPC24D
100-180
24
75/75
86
0.75
0.75
0.75
0.75
50
0.75
319.45
HPC28D
100-180
28
75/75
86
0.75
0.75
0.50
0.50
50
0.75
319.45
HPC48D
100-180
48
75/75
85
0.50
0.50
0.50
0.50
50
0.50
319.45
10% Minimum load required at all times.
* Using proper thermal management, maximum temp. of +85º C (case)
** Reading taken at nominal 150 VDC input

 

HIGH VOLTAGE SERIES PC

TO 300 VDC - 150 WATTS - INPUT 100 - 180 VDC
PICO
PART
NUMBER
INPUT
VOLTAGE
RANGE
(VDC)
OUTPUT
VOLTAGE
(DC)
MAX.
OUTPUT
POWER
(W)*
EFF. @
FULL
LOAD
TYPICAL
(%)**
MAX. LOAD
REGULATION
(%)**
MAX. LINE
REGULATION
AT FULL
LOAD
(%)
OUTPUT
VOLTAGE
RIPPLE
FULL
LOAD
1-1MHzBW
(%)
OUTPUT
VOLTAGE
TOLERANCE
(±%)*
PRICE
(US $)
20 - 50%
50 - 100%
100 - 150 V
150 - 180 V
PC125S
100 - 180
125
150
85
0.5
0.5
0.3
0.3
1
0.5
236.49
PC150S
100 - 180
150
150
85
0.5
0.5
0.3
0.3
1
0.5
236.49
PC175S
100 - 180
175
150
85
0.5
0.5
0.3
0.3
1
0.5
236.49
PC200S
100 - 180
200
150
85
0.5
0.5
0.3
0.3
1
0.5
315.32
PC225S
100 - 180
225
125
85
0.5
0.5
0.3
0.3
1
0.5
315.32
PC250S
100 - 180
250
125
85
0.5
0.5
0.3
0.3
1
0.5
315.32
PC275S
100 - 180
275
100
85
0.5
0.5
0.3
0.3
1
0.5
315.32
PC300S
100 - 180
300
100
85
0.5
0.5
0.3
0.3
1
0.5
394.15
10% Minimum load required at all times
*Using proper thermal management maximum temp. of +85°C (case)
**Reading taken at nominal 150 VDC input
****UL approval pending

 

Go To Mechanical Configuration

Go To Application Notes

For immediate engineering assistance or to place an order: Call Toll Free: 800-431-1064

PICO Electronics, Inc.

143 Sparks Ave. Pelham, NY 10803
Tel: 914-738-1400 Fax: 914-738-8225