DC-DC Converters

Series HPC Single and Series HPC Dual

Isolated Regulated up to 200 Watts, Wide Input Range/100-180 VDC
Fully Regulated, Short Circuit Protected
Parallel Operation Available

Features:

  • Dual isolated outputs
  • Short circuit protection
  • Input voltage protection
  • Thermal, over temp. shutdown
  • Line regulation
  • Load regulation
  • No external components required
  • Hi density, hi efficiency design
  • Remote shutdown
  • Trim capabilities
  • Fixed frequency-100 Khtz

    Typical Characteristics:

    Frequency: 100 Khtz
    Base plate: Max. +85º C
    Operating temperature: See thermal chart, Min. 0º C ambient, Max. +85º C base plate temp.
    Test conditions: 25º C ambient
    Isolation Base Input: 2000 VDC
    Isolation Input Output: 2000 VDC
    Isolation Output to Base: 1000 VDC
    Storage temperature: -55º C to +105º C

      17 Standard Models
      100 VDC Output Models
      Hi Density 100 Watts
      Fixed Frequency

      For all variations, call factory.

    For Parallel Operation: Add suffix "P" (i.e. HPC5SP)

    		•

    The new PICO HPC Series of high power DC-DC Converters, allow a wide input voltage of 100-180 VDC, while maintaining a regulated output. They are fully safeguarded for over voltage, over temperature and continuous short circuit protection.

    The availability of Dual Isolated Outputs, small size, and the capability of parallel operations as standard features should reduce your design and component costs, while the fixed frequency operation helps parallel connections for higher power requirements.

    This high density unit is assembled in the USA with PICO quality and component selection, allowing it to meet the most stringent commercial requirements.


    Larger Version of Graph

    Go To Mechanical Configuration

    Go To Application Notes

    Series HPC Single * 200 Watts * Input 100-180 VDC
    Pico
    Part
    No.         		Input
    Voltage
    Range
    (V DC)         		Output
    Voltage
    (V DC)         		Max.
    Output
    Power
    *
    (W)         		EFF.
    Full Load
    Typical
    **
    (%)         		Max.
    Load
    Regulation
    (%) ***         		Max.
    Line
    Regulation
    At Full Load
    (%)         		Output
    Voltage
    Ripple
    (Full Load)
    1-1MHz BW
    (MV P-P)         		Output
    Voltage
    Tolerance
    **
    (± %)         		Price
    (US $)
    10-50% 50-100% 100-150 150-180
    HPC3.3S
    100-180
    3.3
    75
    71
    1.50
    1.50
    1.25
    1.25
    50
    1.5
    223.54
    HPC5S
    100-180
    5
    100
    76
    1.25
    1.25
    1.00
    1.00
    50
    1.5
    223.54
    HPC5.2S
    100-180
    5.2
    100
    76
    1.25
    1.25
    1.00
    1.00
    50
    1.5
    223.54
    HPC9S
    100-180
    9
    150
    80
    1.25
    1.25
    1.00
    1.00
    50
    1.0
    223.54
    HPC12S
    100-180
    12
    200
    83
    1.00
    1.00
    0.75
    0.75
    50
    1.0
    223.54
    HPC15S
    100-180
    15
    200
    84
    1.00
    1.00
    0.75
    0.75
    50
    1.0
    223.54
    HPC24S
    100-180
    24
    200
    86
    0.75
    0.75
    0.50
    0.50
    50
    0.75
    223.54
    HPC28S
    100-180
    28
    200
    86
    0.75
    0.75
    0.50
    0.50
    50
    0.75
    223.54
    HPC48S
    100-180
    48
    200
    86
    0.50
    0.50
    0.50
    0.50
    50
    0.50
    223.54
    HPC100S
    100-180
    100
    150
    85
    0.50
    0.50
    0.50
    0.50
    50
    0.50
    286.59
    10% Minimum load required at all times.
    * Using proper thermal management, maximum temp. of +85º C (case)
    ** Reading taken at nominal 150 VDC input

    Series HPC Dual * 150 Watts * Input 100-180 VDC
    Pico
    Part
    No.         		Input
    Voltage
    Range
    (V DC)         		Output
    Voltage
    (V DC)         		Max.
    Output
    Power
    *
    (W)         		EFF.
    Full Load
    Typical
    **
    (%)         		Max.
    Load
    Regulation
    (%) ***         		Max.
    Line
    Regulation
    At Full Load
    (%)         		Output
    Voltage
    Ripple
    (Full Load)
    1-1MHz BW
    (MV P-P)         		Output
    Voltage
    Tolerance
    **
    (± %)         		Price
    (US $)
    10-50% 50-100% 100-150 150-180
    HPC5D
    100-180
    5
    50/50
    76
    1.25
    1.25
    1.00
    1.00
    50
    1.5
    298.56
    HPC9D
    100-180
    9
    75/75
    80
    1.25
    1.25
    1.00
    1.00
    50
    1.0
    298.56
    HPC12D
    100-180
    12
    75/75
    83
    1.00
    1.00
    0.75
    0.75
    50
    1.0
    298.56
    HPC15D
    100-180
    15
    75/75
    84
    1.00
    1.00
    0.75
    0.75
    50
    1.0
    298.56
    HPC24D
    100-180
    24
    75/75
    86
    0.75
    0.75
    0.75
    0.75
    50
    0.75
    298.56
    HPC28D
    100-180
    28
    75/75
    86
    0.75
    0.75
    0.50
    0.50
    50
    0.75
    298.56
    HPC48D
    100-180
    48
    75/75
    85
    0.50
    0.50
    0.50
    0.50
    50
    0.50
    298.56
    10% Minimum load required at all times.
    * Using proper thermal management, maximum temp. of +85º C (case)
    ** Reading taken at nominal 150 VDC input

     

    HIGH VOLTAGE SERIES PC

    TO 300 VDC - 150 WATTS - INPUT 100 - 180 VDC
    PICO
    PART
    NUMBER
    INPUT
    VOLTAGE
    RANGE
    (VDC)
    OUTPUT
    VOLTAGE
    (DC)
    MAX.
    OUTPUT
    POWER
    (W)*
    EFF. @
    FULL
    LOAD
    TYPICAL
    (%)**
    MAX. LOAD
    REGULATION
    (%)**
    MAX. LINE
    REGULATION
    AT FULL
    LOAD
    (%)
    OUTPUT
    VOLTAGE
    RIPPLE
    FULL
    LOAD
    1-1MHzBW
    (%)
    OUTPUT
    VOLTAGE
    TOLERANCE
    (±%)*
    PRICE
    (US $)
    20 - 50%
    50 - 100%
    100 - 150 V
    150 - 180 V
    PC125S
    100 - 180
    125
    150
    85
    0.5
    0.5
    0.3
    0.3
    1
    0.5
    214.99
    PC150S
    100 - 180
    150
    150
    85
    0.5
    0.5
    0.3
    0.3
    1
    0.5
    214.99
    PC175S
    100 - 180
    175
    150
    85
    0.5
    0.5
    0.3
    0.3
    1
    0.5
    214.99
    PC200S
    100 - 180
    200
    150
    85
    0.5
    0.5
    0.3
    0.3
    1
    0.5
    286.66
    PC225S
    100 - 180
    225
    125
    85
    0.5
    0.5
    0.3
    0.3
    1
    0.5
    286.66
    PC250S
    100 - 180
    250
    125
    85
    0.5
    0.5
    0.3
    0.3
    1
    0.5
    286.66
    PC275S
    100 - 180
    275
    100
    85
    0.5
    0.5
    0.3
    0.3
    1
    0.5
    286.66
    PC300S
    100 - 180
    300
    100
    85
    0.5
    0.5
    0.3
    0.3
    1
    0.5
    358.32
    10% Minimum load required at all times
    *Using proper thermal management maximum temp. of +85°C (case)
    **Reading taken at nominal 150 VDC input
    ****UL approval pending

    For immediate engineering assistance or to place an order: Call Toll Free: 800-431-1064

    PICO Electronics, Inc.

    143 Sparks Ave. Pelham, NY 10803-1810
    Tel: 914-738-1400 Fax: 914-738-8225