PDF version
Military DC

SERIES AVP and AVN
PLUG-IN DC-DC CONVERTERS

High Output Voltage: 6,000 VDC to 10,000 VDC
High Reliability
Ultra-Miniature - Low Profile

This series of unregulated high voltage DC-DC converters with output voltages to 10,000 VDC are produced in an ultra-miniature encapsulated package. 50 different standard models are available. These single output units will operate over the temperature range of -25º C to +70º C with no heat sink or electrical derating. For military applications an operating temperature range -55º C to +85 º C is available. An optional environmental screening package per MIL-STD-883 is also available.

FEATURES 
  • Output Voltages: 6,000 VDC to 10,000 VDC
  • 1.25 watt output at 70º ambient
  • Ultra-miniature size 0.500" height, 5.0 grams weight, 0.25 cubic inches volume
  • 5 input voltage ranges 5, 12, 15, 24 and 28 VDC
  • Transformer Isolated Design
  • MIL-STD 883 options available
  • No heat sink or electrical derating required
OPTIONS AVAILABLE
  • Per Mil. Std. 883
  • Expanded operating temp. (-55º C to +85º C)
  • Stabilization Bake (125º C amblent) - Method 1008
  • Temperature Cycle (-55º C to +125º C) - Method 1010, Condition B
  • Hi Temp, Burn-In - Method 1015 as a guide
    TYPICAL CHARACTERISTICS:
  • Test conditions: 25º C ambient and input voltage at nominal value unless otherwise specified. 
  • LINE REGULATION: OUTPUT IS DIRECTLY PROPORTIONAL TO THE INPUT. 
  • Input voltage range: ±10% all models 
  • Output voltage tolerance at full load-nom. Input: ±3%
    Please keep loaded to minimum of 10% at all times.
    Note: For tighter output voltage tolerances, please consult factory. 
  • Converter frequency: 20 - 40 KHz 
  • Output temperature coefficient: 0.05%/ºC for all models 
  • Operating temperature: -25º C to +70º C ambient. No heat sink is required. 
  • Storage temperature: -55º C to +125º C

 

 

 
 

SERIES AVP - SINGLE OUTPUT
COMMON GROUND POSITIVE OUTPUT
For use when input and output grounds are connected and a positive output voltage is required
PICO
Plug-in
Part
Number
Input
Voltage
(V DC)
Output
Voltage
(V DC)
**
Max.
Load
Current
(mA)
Max.
Output
Power
(watts)
Eff. @
Full
Load
Typical
(%)
Input
Current
Full
Load
Typical
(mA)
*
Output
Volt.
Ripple
@ Full
Load
(Vp-p max)
Full
Load
Output
Volt.
Tolerance
(±%)
Price
(US $)
5AVP6K
5AVP7K
5AVP8K
5AVP9K
5AVP10K
5
5
5
5
5
+6000
+7000
+8000
+9000
+10000
0.208
0.179
0.156
0.139
0.125
1.25
1.25
1.25
1.25
1.25
74
74
73
72
70
338
338
342
347
357
150
150
160
180
200
3
3
3
3
3
302.18
320.32
339.53
359.90
381.50
12AVP6K
12AVP7K
12AVP8K
12AVP9K
12AVP10K
12
12
12
12
12
+6000
+7000
+8000
+9000
+10000
0.208
0.179
0.156
0.139
0.125
1.25
1.25
1.25
1.25
1.25
77
76
76
75
74
135
137
137
139
141
150
150
150
180
200
3
3
3
3
3
302.18
320.32
339.53
359.90
381.50
15AVP6K
15AVP7K
15AVP8K
15AVP9K
15AVP10K
15
15
15
15
15
+6000
+7000
+8000
+9000
+10000
0.208
0.179
0.156
0.139
0.125
1.25
1.25
1.25
1.25
1.25
76
75
74
73
73
110
111
113
114
114
150
150
160
180
200
3
3
3
3
3
302.15
320.32
339.53
359.90
381.50
24AVP6K
24AVP7K
24AVP8K
24AVP9K
24AVP10K
24
24
24
24
24
+6000
+7000
+8000
+9000
+10000
0.208
0.179
0.156
0.139
0.125
1.25
1.25
1.25
1.25
1.25
76
76
76
76
75
69
69
69
69
70
150
150
160
180
200
3
3
3
3
3
302.18
320.32
339.53
359.90
381.50
28AVP6K
28AVP7K
28AVP8K
28AVP9K
28AVP10K
28
28
28
28
28
+6000
+7000
+8000
+9000
+10000
0.208
0.179
0.156
0.139
0.125
1.25
1.25
1.25
1.25
1.25
75
75
75
75
75
60
60
60
60
60
150
150
160
180
200
3
3
3
3
3
302.18
320.32
339.53
359.90
381.50
* Additional Capacitor up to 470 pf can be placed across the output for further Ripple reduction.
** Maintain at least 10% of load at all times to prevent voltage surge.
Ordering Instructions: No minimum. Net 30 days F.O.B. Pelham, New York

SAFETY NOTE: The high voltage power supplies described in this datasheet generate voltages which can be lethal. They should only be installed and used by personnel who have received the appropriate training and who are fully aware of the hazards that exist.

Series AVP Single Output
For use when input and output grounds are connected and a positive output voltage is required
AVP - SINGLE OUTPUT

Weight: 9.5 Grams Typical
Measurements are in Inches
SERIES AVP - LOAD


 

SERIES AVN - SINGLE OUTPUT
COMMON GROUND NEGATIVE OUTPUT
For use when input and output grounds are connected and a negative output voltage is required
PICO
Plug-in
Part
Number
Input
Voltage
(V DC)
Output
Voltage
(V DC)
**
Max.
Load
Current
(mA)
Max.
Output
Power
(watts)
Eff. @
Full
Load
Typical
(%)
Input
Current
Full
Load
Typical
(mA)
*
Output
Volt.
Ripple
@ Full
Load
(Vp-p max)
Full
Load
Output
Volt.
Tolerance
(±%)
Price
(US $)
5AVN6K
5AVN7K
5AVN8K
5AVN9K
5AVN10K
5
5
5
5
5
-6000
-7000
-8000
-9000
-10000
0.208
0.179
0.156
0.139
0.125
1.25
1.25
1.25
1.25
1.25
74
74
73
72
70
338
338
342
347
357
150
150
160
180
200
3
3
3
3
3
302.18
320.32
339.53
359.90
381.50
12AVN6K
12AVN7K
12AVN8K
12AVN9K
12AVN10K
12
12
12
12
12
-6000
-7000
-8000
-9000
-10000
0.208
0.179
0.156
0.139
0.125
1.25
1.25
1.25
1.25
1.25
77
76
76
75
74
135
137
137
139
141
150
150
160
180
200
3
3
3
3
3
302.18
320.32
339.53
359.90
381.50
15AVN6K
15AVN7K
15AVN8K
15AVN9K
15AVN10K
15
15
15
15
15
-6000
-7000
-8000
-9000
-10000
0.208
0.179
0.156
0.139
0.125
1.25
1.25
1.25
1.25
1.25
76
75
74
73
73
110
110
113
114
114
150
150
160
180
200
3
3
3
3
3
302.15
320.32
339.53
359.90
381.50
24AVN6K
24AVN7K
24AVN8K
24AVN9K
24AVN10K
24
24
24
24
24
-6000
-7000
-8000
-9000
-10000
0.208
0.179
0.156
0.139
0.125
1.25
1.25
1.25
1.25
1.25
76
76
76
76
75
69
69
69
69
70
150
150
160
180
200
3
3
3
3
3
302.18
320.32
339.53
359.90
381.50
28AVN6K
28AVN7K
28AVN8K
28AVN9K
28AVN10K
28
28
28
28
28
-6000
-7000
-8000
-9000
-10000
0.208
0.179
0.156
0.139
0.125
1.25
1.25
1.25
1.25
1.25
75
75
75
75
75
60
60
60
60
60
150
150
160
180
200
3
3
3
3
3
302.18
320.32
339.53
359.90
381.50
* Additional Capacitor up to 470 pf can be placed across the output for further Ripple reduction.
** Maintain at least 10% of load at all times to prevent voltage surge.
Ordering Instructions: No minimum. Net 30 days F.O.B. Pelham, New York

SAFETY NOTE: The high voltage power supplies described in this datasheet generate voltages which can be lethal. They should only be installed and used by personnel who have received the appropriate training and who are fully aware of the hazards that exist.

Series AVN Single Output
For use when input and output grounds are connected and a negative output voltage is required

AVN - SINGLE OUTPUT

Weight: 9.5 Grams Typical
Measurements are in Inches

SERIES AVN - LOAD

For immediate engineering assistance or to place an order:
Call Toll Free: 800-431-1064

PICO Electronics, Inc.

143 Sparks Ave. Pelham, NY 10803-1810
Tel: 914-738-1400 or Fax: 914-738-8225

Go back to DC-DC Converters menu